Uncoupling
Uncoupling a trailer: the steps in order
Uncoupling is the reverse of coupling, and the order matters because a trailer that is not supported can roll.
Uncoupling, step by step
- Uncoupling — prepare: Apply the parking brake on the tractor. Apply chocks or blocks to the trailer wheels. Ensure the area behind the trailer is clear.
- Uncoupling — lower the landing gear: Lower the landing gear until the trailer is resting fully on the landing gear pads and the fifth wheel is taking no weight.
- Uncoupling — release the fifth wheel: Pull the fifth wheel release lever to unlock the jaws. On some fifth wheels, this requires pulling forward slightly to release tension.
- Uncoupling — disconnect and pull away: Disconnect the air and electrical lines. Pull the tractor forward and away from the trailer, ensuring no lines are still connected.
A mistake to avoid
- Uncoupling without blocking the trailer wheels — if the landing gear fails or the trailer rolls, it can cause a runaway trailer.
Questions to expect
Practice answering these out loud, then check your answers against your CDL manual:
- What is the correct procedure if the fifth wheel release lever is difficult to pull during uncoupling?
- Why must the trailer wheels be chocked before uncoupling?
Why it matters
An uncoupled trailer that rolls away from the dock has killed dock workers and damaged property.
Keep going
Sources named in the study material
- 49 CFR 393.70 - Coupling devices and moves
- FMCSA CDL Manual, Section 6 - Combination Vehicles
This is an independent practice tool, not official instruction. Test rules differ by state, so check your state CDL manual before test day.
Say it out loud, like test day
Reading is not the same as answering an examiner. Try a free practice exam on this topic and get pushed on what you skip.
Start the free exam One free full exam per device. No sign-up.