CDL Oral Simulator

CDL Classification

CDL Classification: questions to expect on the CDL oral exam

These 10 questions are written from our study material for this topic. Answer each one out loud before you look anything up.

Questions to expect

Practice answering these out loud, then check your answers against your CDL manual:

  • You want to operate a tractor-semitrailer whose GCWR is 80,000 pounds and whose semitrailer GVWR is 30,000 pounds. Which CDL group do you need, and which class do you ask for on the application?
  • Which endorsements are permitted on a Commercial Learner's Permit, and which are not?
  • What does the X endorsement on a CDL actually mean?
  • A driver holds a Group B CDL and is offered a school bus that requires a Group B license. What does he need before he can drive it with children aboard?
  • You failed the air brake portion of the knowledge test. What appears on the license that is issued?
  • Can a Commercial Learner's Permit holder with the N endorsement pull a loaded tanker that was used yesterday to haul gasoline?
  • What is the minimum percentage you must score on each CDL knowledge test to pass, and what happens if you miss it on the combination vehicle section?
  • Is a CDL issued in one State valid for driving commercial vehicles in every other State?
  • You performed your skills test in a truck tractor coupled to a semitrailer with a pintle hook instead of a fifth wheel. What restriction will appear on your Group A CDL?
  • May a driver take the CDL skills test entirely in a simulator?

The rule behind the questions

Under 49 CFR 383.91(a), CDL groups are defined by configuration and weight, not by axle count alone. Group A is any combination vehicle with a Gross Combination Weight Rating (GCWR) of 11,794 kg (26,001 lb) or more, provided the GVWR of the vehicle(s) being towed is more than 4,536 kg (10,000 lb). Group B is any single vehicle with a GVWR of 11,794 kg (26,001 lb) or more, or any such vehicle towing a vehicle not in excess of 4,536 kg (10,000 lb) GVWR. Group C is any single vehicle, or combination of vehicles, that meets neither the Group A nor the Group B definition but is either designed to transport 16 or more people including the driver, or is used to transport hazardous materials as defined in 383.5. Under 383.91(c), the groups are hierarchical: passing Group A lets you operate Group B and Group C vehicles provided you hold the requisite endorsement(s), and passing Group B lets you operate Group C. Under 383.93(b), an operator must hold State-issued endorsements to operate double/triple trailers, passenger vehicles, tank vehicles, vehicles transporting hazardous materials, and school buses. Under 383.93(c), double/triple requires a knowledge test; passenger requires both a knowledge test and a skills test; tank vehicle requires a knowledge test; hazardous materials requires a knowledge test; and school bus requires both a knowledge test and a skills test. Under 383.153(a)(8)-(9), the document codes are A/B/C for the group and T (double/triple), P (passenger), N (tank vehicle), H (hazardous materials), X (a combination of tank vehicle and hazardous materials endorsements), and S (school bus) for the endorsements. Note carefully: X is NOT all four endorsements - it is the tank vehicle plus hazardous materials pairing. Under 383.93(a)(2) and 383.25(a)(5), the only endorsements that may appear on a CLP are Passenger (P), School bus (S), and Tank vehicle (N); a CLP holder with a P or S endorsement is prohibited from carrying passengers other than Federal or State auditors and inspectors, test examiners, other trainees, and the supervising CDL holder, and a CLP holder with an N endorsement may only operate an empty tank vehicle and may not operate a tank that previously contained hazardous material that has not been purged of residue. Under 383.153(a)(10) and 383.95, the State MUST add a restriction code when the applicant fails the air brake component of the knowledge test or tests in a non-air-brake vehicle (L), tests in an air-over-hydraulic vehicle (Z), tests in an automatic transmission vehicle (E), tests a Group A combination with a pintle hook instead of a fifth wheel (O), or tests the passenger endorsement in a Group B passenger vehicle when a Group A endorsement is sought (M). Under 383.135(a)(1), the applicant must correctly answer at least 80 percent of the questions on each knowledge test to pass; a failure on the air brake portion means an L restriction, and a failure on the combination vehicle portion means no Group A CLP or CDL may be issued at all. Under 383.113(d), skills tests must be conducted in on-street conditions or a combination of on-street and off-street conditions, and under 383.113(e) a simulator may be used but may never substitute for the required on-street testing.

Why examiners care

Classification errors are paperwork errors until the day they are not. A driver without the N endorsement who loads gasoline, or without the P endorsement who takes a church group to the airport, or without the H endorsement who hauls placardable corrosive material, is operating a vehicle they were never examined to operate. Because the endorsement test exists precisely because the vehicle type adds a hazard the base knowledge test does not cover - liquid surge on a tanker, uncontrolled evacuation on a bus, placarding errors on a hazmat load - skipping it removes the one check that stood between the driver and the hazard. Getting the group, the endorsements, and the restrictions right on paper is the same discipline as getting the vehicle right in the yard.

Check your state

Every State must issue at least the federal groups and endorsements, and a State may add its own endorsement groupings only if each discretionary code is fully explained on the front or back of the license per 49 CFR 383.153(a)(9)(vii) and (a)(10)(ix). States cannot reduce the federal requirement, but they do vary in practice: some administer the federal question pool while others add State-specific items on topics such as school bus loading zones, chain law, and winter driving. Under 383.135(a)(1) the federal passing floor is 80 percent on each knowledge test, and a State may not set a lower bar. Confirm the current fee, appointment, and re-test rules for removing an L, Z, or E restriction with your State licensing agency - those are State-administered procedures, not federal requirements.

Keep going

Sources named in the study material

  • 49 CFR 383.91 - Commercial motor vehicle groups - https://www.ecfr.gov/current/title-49/section-383.91
  • 49 CFR 383.93 - Endorsements (and the only endorsements allowed on a CLP) - https://www.ecfr.gov/current/title-49/section-383.93
  • 49 CFR 383.153 - Information on the CLP and CDL documents, group and endorsement codes - https://www.ecfr.gov/current/title-49/section-383.153
  • 49 CFR 383.25 - Commercial learner's permit (CLP) - https://www.ecfr.gov/current/title-49/section-383.25
  • 49 CFR 383.95 - Restrictions (air brake, full air brake, manual transmission, tractor-trailer, Group A passenger) - https://www.ecfr.gov/current/title-49/section-383.95
  • 49 CFR 383.110 - General requirement (one license, one home State) - https://www.ecfr.gov/current/title-49/section-383.110
  • 49 CFR 383.111 - Required knowledge - https://www.ecfr.gov/current/title-49/section-383.111
  • 49 CFR 383.113 - Required skills - https://www.ecfr.gov/current/title-49/section-383.113
  • 49 CFR 383.135 - Passing knowledge and skills tests (80 percent) - https://www.ecfr.gov/current/title-49/section-383.135

This is an independent practice tool, not official instruction. Test rules differ by state, so check your state CDL manual before test day.

Say it out loud, like test day

Reading is not the same as answering an examiner. Try a free practice exam on this topic and get pushed on what you skip.

Start the free exam One free full exam per device. No sign-up.