Class B
Class B CDL pre-trip inspection checklist
A Class B vehicle is a single vehicle, so there is no coupling section. The rest of the walk-around, including the brake check, still applies.
What makes it Class B
Group B is any single vehicle with a GVWR of 11,794 kg (26,001 lb) or more, or any such vehicle towing a vehicle not in excess of 4,536 kg (10,000 lb) GVWR. Under 383.91(c), the groups are hierarchical: passing Group A lets you operate Group B and Group C vehicles provided you hold the requisite endorsement(s), and passing Group B lets you operate Group C.
The walk-around, minus the coupling step
- Start at the front of the vehicle: approach and assess overall condition visually before touching anything.
- Engine compartment check: Inspect belts, fluid levels, battery connections, and obvious leaks.
- Front of vehicle: Check headlights, turn signals, grille, bumper, and windshield for cracks or damage.
- Cab interior: Verify seat belt function, horn, windshield wipers, mirrors (adjust if needed), and gauge cluster for warning lights.
- Left-front wheel area: Check tire condition (tread depth, sidewall damage), wheel and rim condition, and lug nuts.
- Left-front axle and brake: From the wheel area, inspect the brake chamber, slack adjuster, air hoses, and brake drum and linings for damage, leaks, and loose or missing parts.
- Left side of vehicle: Check running lights, clearance lights, reflective tape, and trailer connection (on combination vehicles).
- Rear of vehicle: Inspect tail lights, brake lights, turn signals, reflective devices, and license plate.
- Right-front wheel and axle: Mirror the left-front inspection.
- Right side of vehicle: Check passenger-side lights, reflective tape, and cargo security (on cargo vehicles).
- Under vehicle: Check for fuel, oil, or coolant leaks on the ground.
- Rear axle and brake assemblies: Inspect brake chambers, slack adjusters, and air lines.
- Final verification: Start the engine, allow air pressure to build, test service brakes, and verify the parking brake.
A mistake that costs candidates
- Forgetting safety-critical items: headlights, brake lights, tire tread depth, and brake function.
- Skipping the air brake check on vehicles with air brakes — the examiner will specifically ask about the low-air warning and service brake operation.
Keep going
Sources named in the study material
- 49 CFR 383.113(a) - Pre-trip vehicle inspection
- FMCSA 2005 CDL Driver Manual, Section 11 - Vehicle Inspection Test
- New York State CDL Manual, Section 11 mapping
- 49 CFR 383.91 - Commercial motor vehicle groups - https://www.ecfr.gov/current/title-49/section-383.91
- 49 CFR 383.93 - Endorsements (and the only endorsements allowed on a CLP) - https://www.ecfr.gov/current/title-49/section-383.93
- 49 CFR 383.153 - Information on the CLP and CDL documents, group and endorsement codes - https://www.ecfr.gov/current/title-49/section-383.153
- 49 CFR 383.25 - Commercial learner's permit (CLP) - https://www.ecfr.gov/current/title-49/section-383.25
- 49 CFR 383.95 - Restrictions (air brake, full air brake, manual transmission, tractor-trailer, Group A passenger) - https://www.ecfr.gov/current/title-49/section-383.95
- 49 CFR 383.110 - General requirement (one license, one home State) - https://www.ecfr.gov/current/title-49/section-383.110
- 49 CFR 383.111 - Required knowledge - https://www.ecfr.gov/current/title-49/section-383.111
- 49 CFR 383.113 - Required skills - https://www.ecfr.gov/current/title-49/section-383.113
- 49 CFR 383.135 - Passing knowledge and skills tests (80 percent) - https://www.ecfr.gov/current/title-49/section-383.135
This is an independent practice tool, not official instruction. Test rules differ by state, so check your state CDL manual before test day.
Say it out loud, like test day
Reading is not the same as answering an examiner. Try a free practice exam on this topic and get pushed on what you skip.
Start the free exam One free full exam per device. No sign-up.