CDL Oral Simulator

Post-trip and DVIR

Post-trip inspection and the DVIR: en-route checks to end of day

The inspection loop does not end at the first drive-off. This is the part of the study material about checks at stops, the end-of-day inspection and the written report.

The steps

  1. Perform an en-route check at each rest stop or refueling stop: Walk around the vehicle and check tires (inflation and visible damage), lights (functioning), and obvious cargo securement. This is an abbreviated check, not a full inspection.
  2. At the end of each workday: Conduct a full vehicle inspection covering all safety items — brakes, tires, lights, wheels, coupling devices, and cargo securement.
  3. Complete the driver vehicle inspection report (DVIR): List any defect or deficiency clearly. If none is found, a property-carrying vehicle needs no report, but a passenger-carrying vehicle still does.
  4. Sign and submit the DVIR: The driver must sign the report. If defects are listed, the motor carrier must certify that they have been repaired, or that repair is unnecessary, before the vehicle operates again.
  5. Review the previous DVIR before starting: Per 49 CFR 396.13, the driver must check that any previously noted defects were repaired. Do not operate a vehicle with an open, unrepaired defect.
  6. Post-trip walk-around: Check for new damage that occurred during the trip — cargo shifted, tires picked up debris, lights were damaged, or brake chambers developed air leaks.

What the rule says

Per 49 CFR 396.11, a driver must prepare a written report at the end of each day's work on each vehicle operated, listing any defect or deficiency that would affect safe operation or cause a breakdown. Drivers of property-carrying vehicles do not have to prepare the report when no defect is found or reported; drivers of passenger-carrying vehicles still must. Per 49 CFR 396.13, a driver must be satisfied the vehicle is in safe operating condition and review the last vehicle inspection report before driving, and must not operate a vehicle with listed defects that have not been repaired or certified as not needing repair.

Mistakes to avoid

  • Signing the DVIR with defects listed and then driving without reporting them — the signature certifies the inspection was done; unreported defects are a federal violation.
  • Reviewing the previous DVIR but ignoring previously noted defects — the driver must not operate a vehicle with an open defect.
  • Skipping the en-route check at a stop. Tires, brakes and cargo can change during a trip, and a stop is the time to catch it.
  • Completing the DVIR without actually inspecting the vehicle — a driver who signs a false report faces severe federal penalties.
  • Confusing the en-route check with the post-trip inspection — they are different in scope and timing.

Questions to expect

Practice answering these out loud, then check your answers against your CDL manual:

  • How often must a CDL driver complete a driver vehicle inspection report (DVIR)?
  • What must a driver do if the previous DVIR listed a defect that has not been repaired?
  • What should a driver do if an en-route check reveals a new defect, such as a low tire?
  • What is the difference between an en-route check and a post-trip inspection?
  • Who must sign the driver vehicle inspection report?

Why it matters

A driver who ignores a prior DVIR defect and drives a vehicle with failed brakes or a blown tire is operating illegally and dangerously. The DVIR is a legal document — signing it falsely or failing to file it are federal violations. The inspection loop (pre-trip, en-route, post-trip) is the only mechanism that catches mid-trip failures before they cause an incident.

Keep going

Sources named in the study material

  • 49 CFR 396.11 - Driver vehicle inspection report
  • 49 CFR 396.13 - Driver inspection of the vehicle
  • 49 CFR 396.17 - Periodic inspection
  • FMCSA CDL Manual, Section 2 - Driving Safely (vehicle inspection)

This is an independent practice tool, not official instruction. Test rules differ by state, so check your state CDL manual before test day.

Say it out loud, like test day

Reading is not the same as answering an examiner. Try a free practice exam on this topic and get pushed on what you skip.

Start the free exam One free full exam per device. No sign-up.