CDL Oral Simulator

Lights and reflectors

CDL pre-trip: lights, reflectors and the front and rear of the vehicle

Lights are on the list of items candidates most often forget. Walk the front, both sides and the rear, naming each light and reflective device.

What to check

  1. Front of vehicle: Check headlights, turn signals, grille, bumper, and windshield for cracks or damage.
  2. Left side of vehicle: Check running lights, clearance lights, reflective tape, and trailer connection (on combination vehicles).
  3. Rear of vehicle: Inspect tail lights, brake lights, turn signals, reflective devices, and license plate.
  4. Right side of vehicle: Check passenger-side lights, reflective tape, and cargo security (on cargo vehicles).

A mistake that costs candidates

  • Forgetting safety-critical items: headlights, brake lights, tire tread depth, and brake function.

Why it matters

A cracked windshield can shatter from a stone impact.

Keep going

Sources named in the study material

  • 49 CFR 383.113(a) - Pre-trip vehicle inspection
  • FMCSA 2005 CDL Driver Manual, Section 11 - Vehicle Inspection Test
  • New York State CDL Manual, Section 11 mapping

This is an independent practice tool, not official instruction. Test rules differ by state, so check your state CDL manual before test day.

Say it out loud, like test day

Reading is not the same as answering an examiner. Try a free practice exam on this topic and get pushed on what you skip.

Start the free exam One free full exam per device. No sign-up.