Wheels, tires and brakes
CDL pre-trip: wheels, tires and brake hardware
Each wheel position gets the same check: tire, wheel and rim, lug nuts, then the brake parts behind it. Say what you see and what would be a defect.
What to check at each wheel position
- Left-front wheel area: Check tire condition (tread depth, sidewall damage), wheel and rim condition, and lug nuts.
- Left-front axle and brake: From the wheel area, inspect the brake chamber, slack adjuster, air hoses, and brake drum and linings for damage, leaks, and loose or missing parts.
- Right-front wheel and axle: Mirror the left-front inspection.
- Rear axle and brake assemblies: Inspect brake chambers, slack adjusters, and air lines.
A mistake that costs candidates
- Forgetting safety-critical items: headlights, brake lights, tire tread depth, and brake function.
Questions to expect
Practice answering these out loud, then check your answers against your CDL manual:
- Tell me what you would check on the left-front wheel and explain what you are looking for.
- What are the minimum tread depth requirements for steer tires versus drive axle tires?
Why it matters
A tire at the legal minimum tread (4/32 inch on a steer tire, 2/32 inch on others) can still be unsafe in wet conditions. A loose brake chamber can separate and disable the brakes on that wheel.
Keep going
Sources named in the study material
- 49 CFR 383.113(a) - Pre-trip vehicle inspection
- FMCSA 2005 CDL Driver Manual, Section 11 - Vehicle Inspection Test
- New York State CDL Manual, Section 11 mapping
This is an independent practice tool, not official instruction. Test rules differ by state, so check your state CDL manual before test day.
Say it out loud, like test day
Reading is not the same as answering an examiner. Try a free practice exam on this topic and get pushed on what you skip.
Start the free exam One free full exam per device. No sign-up.